I am not familiar with the release information for the Cumberland River Dams. I do know the release information for the Tennessee River is in CFS Cubic feet per second. I'f my memory serves me right we used cubic feet of water to figure gallons in a swimming pool. We took the cubic feet of a pool and multiplied it by 7.3 gallons to give us volume. Here is the current observation for today on Kentucky Dam.
Kentucky
Latest Operating Information
Please note! Water release schedules often change without notice due to unanticipated changes in weather conditions and power system requirements.
Use caution near dams. A large amount of water may be discharged without warning at any time. Your safety depends on obeying all posted safety regulations and warnings. Learn more.
Kentucky will be spilling until further notice.
Generation Releases
Day Time Period (Central) Generators
1/14/2013 6am - midnight 4 or more
Observed Data
Day Time
(Central) Upstream
Elevation Tailwater Elevation
(below dam)* Average Hourly
Discharge*
1/13/2013 midnight 355.32 315.03 115,799
1/14/2013 1 am 355.36 315.10 116,210
1/14/2013 2 am 355.44 315.07 116,168
1/14/2013 3 am 355.52 315.18 116,064
1/14/2013 4 am 355.63 315.19 116,793
1/14/2013 5 am 355.68 315.25 117,168
1/14/2013 6 am 355.76 315.33 117,640
1/14/2013 7 am 355.84 315.35 118,123
*Elevations are in feet above sea level. Discharges are in cubic feet
per second and are reported at the end of the hour.
So to figure the gallons I would take 116,210 x 7.3 = 848333.....gallons per second. I could be wrong on the gallons per cubic foot figure. It was a long time ago that we figured volume. Close to 30 years.
I am including the web link for TVA for the Tennessee River System. There are all kinds of information on here.
http://www.tva.com/river/index.htm