06-11-2016, 10:28 AM
|
 |
Junior Member
|
|
Join Date: Jun 2013
Location: Nashville, TN
Posts: 80
|
|
Dead Lowrance HDS
My gen 1 HDS-8 is fried. I made sure it wasn't the power connection by plugging in my HDS-5 and it worked just fine. Bummer!
Is there anything that can be done with it or is it useful to anyone for parts or something? Or is it just landfill material now?
The unit is older than 5 years so Lowrance can't do anything for me as far as a discounted new unit.
|
06-11-2016, 10:43 AM
|
 |
Sunfish Assassin
|
|
Join Date: Mar 2015
Location: Old Hickory
Posts: 281
|
|
Man that is a bummer I'd at least take it apart and check for any obvious signs of damage like any black on the board or maybe a fuse or burned capacitor.
|
06-11-2016, 11:20 AM
|
|
Junior Member
|
|
Join Date: Apr 2004
Posts: 416
|
|
My unit seemed dead. I left it disconnected for awhile, rebooted, and then has worked fine ever since.
Buy a new updated. It's only money. And needed for fishing so is justified.
|
06-11-2016, 07:31 PM
|
|
rookie
|
|
Join Date: Jul 2012
Location: Bedford County TN
Posts: 742
|
|
Quote:
Originally Posted by jaycee
My unit seemed dead. I left it disconnected for awhile, rebooted, and then has worked fine ever since.
Buy a new updated. It's only money. And needed for fishing so is justified.
|
I love you take on this John!, I agree, imho the new helix units by HB are a lot better and have come down in price considerably so it may be a foot time to upgrade, did u have a fuse on the hot wire?
|
06-11-2016, 07:32 PM
|
|
rookie
|
|
Join Date: Jul 2012
Location: Bedford County TN
Posts: 742
|
|
Sorry!, meant to say a good time to upgrade, dang auto correct
|
06-11-2016, 07:51 PM
|
|
Junior Member
|
|
Join Date: Jun 2013
Location: Nashville, TN
Posts: 80
|
|
Quote:
Originally Posted by Transplanted Sportsman
I love you take on this John!, I agree, imho the new helix units by HB are a lot better and have come down in price considerably so it may be a foot time to upgrade, did u have a fuse on the hot wire?
|
Yeah the fuse is there and it's in good shape. Like I said, the other Lowrance unit works just fine on those cables. It didn't stop working on the water. Sunday I went out and it worked fine and then Tuesday it wouldn't power on. Tried soft and hard reset...nothing.
When I get around to upgrading, I'll probably get an HDS Gen 2 from the Lowrance Outlet Store (with warranty!) since the boat is already wired for Lowrance.
Last edited by JDH8504; 06-11-2016 at 07:55 PM.
Reason: Missing info
|
06-11-2016, 07:57 PM
|
|
Junior Member
|
|
Join Date: Jun 2013
Location: Nashville, TN
Posts: 80
|
|
Quote:
Originally Posted by jaycee
My unit seemed dead. I left it disconnected for awhile, rebooted, and then has worked fine ever since.
Buy a new updated. It's only money. And needed for fishing so is justified.
|
Yeah, I've been wanting a Gen 2 unit for awhile anyway but my original plan was to move the HDS-8 Gen 1 to the bow and put the new unit at the console. Then maybe sell the HDS-5 or keep for backup. Or run it at the console and dedicate it for mapping. LOL...I got lots of ideas.
|
06-11-2016, 07:59 PM
|
|
Junior Member
|
|
Join Date: Jun 2013
Location: Nashville, TN
Posts: 80
|
|
Quote:
Originally Posted by TnCreekMaster
Man that is a bummer I'd at least take it apart and check for any obvious signs of damage like any black on the board or maybe a fuse or burned capacitor.
|
I took it apart and didn't see anything obvious except for the fact that the magnets that keep the little memory card cover shut were out of place and stuck to the back of a chip on the keypad circuit board. Maybe what fried it?
|
06-13-2016, 10:23 AM
|
|
Junior Member
|
|
Join Date: Apr 2015
Location: lascassas, tn
Posts: 19
|
|
Thats it! The magnet shorted out the chip/board.
You could take a picture and send it to Lowerance with a big email description. They (may) honor the issue and send you a replacement.
It would be worth a shot. Won't cost you anything but time.
|
06-13-2016, 06:42 PM
|
|
Senior Member
|
|
Join Date: Jun 2008
Posts: 500
|
|
Quote:
Originally Posted by brian graves
Thats it! The magnet shorted out the chip/board.
You could take a picture and send it to Lowerance with a big email description. They (may) honor the issue and send you a replacement.
It would be worth a shot. Won't cost you anything but time.
|
Post it on their Facebook page!
|
06-13-2016, 06:48 PM
|
|
Junior Member
|
|
Join Date: May 2009
Posts: 62
|
|
Quote:
Originally Posted by aero320
Post it on their Facebook page!
|
I'd say that would get their attention and create an opportunity (pressure)- and provide them a great audience to make it right
|
06-15-2016, 10:45 AM
|
|
Junior Member
|
|
Join Date: Jun 2013
Location: Nashville, TN
Posts: 80
|
|
My only issue with that is the unit was bought used off of eBay and is likely about 7 to 8 years old. So it's probably seen the end of it's "usable life", even though it was doing great for me just a week ago. I don't even have the serial number because the sticker was missing when it showed up and obviously it won't power on so I can't see it in the software.
Maybe I can call Navico and see if there is some kind of super-secret refurb inventory they can help me out with. I have a baby girl on the way and just wouldn't feel right about dropping mega bucks on a new unit right now. But damn if I'm not bummin' without my setup. How spoiled am I?!?
|
|
|
