FishingTN.com Tennessee's Fishing and Boating Community

Go Back   FishingTN.com Tennessee's Fishing and Boating Community > Mid South Outboards > Tech Tips
Register FAQ Members List Calendar Mark Forums Read
Google
 


Reply
 
Thread Tools
  #1  
Old 12-09-2017, 10:54 AM
thejwalker's Avatar
thejwalker thejwalker is offline
Bank Fisher
 
Join Date: Jul 2017
Location: Antioch / Cane Ridge
Posts: 24
Default Advice on Trailer Maintenance

My Jon Boat trailer is fairly old and was bought with the boat last year. In advance of a trip in which I'd be trailering ~800mi each way I wanted to do some routine maintenance by putting on new wheels, bearings, etc...

There didn't seem to be any issues with the old hubs outside of regular aging and the grease had obvious signs of age.

I decided to go ahead and replace the hub assembly, bearings, seals, wheels, tires, etc... Problem is that it's a 3/4" straight spindle and despite going to Northern Tool, TSC, AutoZone, O'Reilly's nobody has carried this assembly kit for some time.

In my discouragement I'm trying to decide what to do. Would it be dumb to just replace the bearings, grease and seals and hope for the best?

Long-term - should I find someone to weld on newer spindles with more readily available parts? Replace the entire Axle? Should I scrap the entire trailer and find a newer one?

I'd say the 14-ft flat-bottom only weights about ~150lbs empty and with regular boating cargo that stuff doesn't add another 50lbs or so. The wheel configuration is 5 bolt @ 4.5" spread. Tires are 8".

I don't have much experience with this type of stuff so I'd appreciate any guidance that can be given.

Thanks
Reply With Quote
  #2  
Old 12-09-2017, 11:47 AM
tkwalker's Avatar
tkwalker tkwalker is offline
Owner and Administrator
 
Join Date: Apr 2005
Location: Lebanon, Tennessee
Posts: 2,925
Smile Hmmmmm <'TK><

Jon, what condition are the old bearings and seals ... What condition is the hub... Can you post pic's .... Yes, 3/4 inch straight spindles are obsolete, but your components may be still serviceable <'TK><

Last edited by tkwalker; 12-09-2017 at 11:54 AM.
Reply With Quote
  #3  
Old 12-21-2017, 07:21 PM
Halli's Avatar
Halli Halli is offline
Senior Member
 
Join Date: Aug 2013
Location: Hermitage
Posts: 901
Thumbs up

All of those are available from Lucky B' in Cookeville and they sell to many vendors and use the Heavy Truck folks in Nashville like FleetPride and TruckPro.
Reply With Quote
  #4  
Old 12-21-2017, 10:13 PM
skillet's Avatar
skillet skillet is offline
Fishing Fool
 
Join Date: Apr 2008
Location: Rivergate area
Posts: 1,314
Default

Northern tool and tsc have axles that are cheaper than having different spindles cut and welded on.


Sent from my iPhone using Tapatalk
Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:23 PM.


Site best viewed at 1280X1024
© FishingTN.com