FishingTN.com Tennessee's Fishing and Boating Community

Go Back   FishingTN.com Tennessee's Fishing and Boating Community > Fishing Discussion > Local Fishing
Register FAQ Members List Calendar Mark Forums Read
Google
 


Reply
 
Thread Tools
  #1  
Old 03-24-2022, 08:02 PM
Alan 54 Alan 54 is offline
Member
 
Join Date: Aug 2019
Location: Columbia
Posts: 162
Default test prop OMC

TK Walker if you need to drop this topic down to the lounge I won't feel bad.
I am in need of a test prop to run in a tank. I have a 1998 Evinrude 225 running a 14-1/2 x 24 Raker. Any info on what I need or how to find out will be so helpful. Thanks
Reply With Quote
  #2  
Old 03-24-2022, 08:40 PM
tkwalker's Avatar
tkwalker tkwalker is offline
Owner and Administrator
 
Join Date: Apr 2005
Location: Lebanon, Tennessee
Posts: 2,925
Smile Wow

Alan, I only have test wheels for early vintage OMC's up to 35 HP... Sorry.
Reply With Quote
  #3  
Old 03-24-2022, 09:05 PM
Alan 54 Alan 54 is offline
Member
 
Join Date: Aug 2019
Location: Columbia
Posts: 162
Default

Quote:
Originally Posted by tkwalker View Post
Alan, I only have test wheels for early vintage OMC's up to 35 HP... Sorry.
I have been reading a lot online. I might be looking for a unicorn. I have only seen one for sale and it was gone. I'm not sure they even made one for a 1998 225hp.
My motor has been bogging down after it warms up. Last year I took a chance and had the power pack replaced. It ran good in cooler weather but when I was out last time it was mid 70's. It started cutting out again. I was wanting to run the motor to get it hot and test the circuits again. Thus the need for a test wheel. I would take it to a dealer but I don't want to miss the bite again this year. I missed it last year too. The repair side of the dealers are 4 to 6 weeks out. Thanks, Alan
Reply With Quote
  #4  
Old 03-25-2022, 07:44 AM
tnduxcaller tnduxcaller is offline
Junior Member
 
Join Date: Feb 2014
Location: Bedford Co,TN
Posts: 21
Default

You might go to the Prop Shop in Englewood. It is on the main drag on the right heading toward Dupont City. I would call them. They used to be really good with props. Good luck.
Reply With Quote
  #5  
Old 03-25-2022, 10:13 AM
SalmonDaze SalmonDaze is offline
Senior Member
 
Join Date: Dec 2012
Location: Mt. Juliet, TN
Posts: 322
Default

Quote:
Originally Posted by tnduxcaller View Post
You might go to the Prop Shop in Englewood. It is on the main drag on the right heading toward Dupont City. I would call them. They used to be really good with props. Good luck.
I don't know this shop, but I strongly agree with the direction of the proposed solution. There's nothing "magic" about year, make, model of an outboard and its prop.

A good prop shop will allow you to test multiple props before deciding on which one to purchase. The variable geometry, along with the hydro-dynamic properties of the boat (weight, centerline depth, etc) affect performance parameters.

A simple change of moving the outboard up a hole, or down a hole in its position on the transom ALONE can make a world of difference in how the boat/motor perform.

Good Luck!!! It can be a challenge.
Reply With Quote
  #6  
Old 03-25-2022, 11:01 AM
notorious's Avatar
notorious notorious is offline
Senior Member
 
Join Date: Sep 2015
Location: The Great State of Tennessee
Posts: 505
Default

Quote:
Originally Posted by tnduxcaller View Post
You might go to the Prop Shop in Englewood. It is on the main drag on the right heading toward Dupont City. I would call them. They used to be really good with props. Good luck.
I have used the Prop Shop as my primary source ever time I needed a prop. I can't recall the owners name, however he is magician when it comes to rebuilding props and giving advice.
Reply With Quote
  #7  
Old 03-25-2022, 03:02 PM
tkwalker's Avatar
tkwalker tkwalker is offline
Owner and Administrator
 
Join Date: Apr 2005
Location: Lebanon, Tennessee
Posts: 2,925
Default FYI Test Wheels (PROPS)

A test wheel is a prop that lets you rev your motor under load without propelling the boat. Trying different props is not what Alan is asking for. Test wheels are simple to use on smaller motors that can be put in a barrel, In Alan's case he can back the trailer to the edge of the water on the ramp .. TK
Reply With Quote
  #8  
Old 03-25-2022, 09:49 PM
Alan 54 Alan 54 is offline
Member
 
Join Date: Aug 2019
Location: Columbia
Posts: 162
Default

Quote:
Originally Posted by tkwalker View Post
A test wheel is a prop that lets you rev your motor under load without propelling the boat. Trying different props is not what Alan is asking for. Test wheels are simple to use on smaller motors that can be put in a barrel, In Alan's case he can back the trailer to the edge of the water on the ramp .. TK
Thanks for saving me TK!!
Reply With Quote
  #9  
Old 03-26-2022, 08:47 AM
SalmonDaze SalmonDaze is offline
Senior Member
 
Join Date: Dec 2012
Location: Mt. Juliet, TN
Posts: 322
Default

I was wondering about the need for a prop and a barrel of water . . .

I have PLENTY of "test" props. Come and take your pick.

Attached Images
File Type: jpg propBefore.jpg (6.7 KB, 3 views)
Reply With Quote
  #10  
Old 03-27-2022, 09:19 AM
Alan 54 Alan 54 is offline
Member
 
Join Date: Aug 2019
Location: Columbia
Posts: 162
Default

Quote:
Originally Posted by SalmonDaze View Post
I was wondering about the need for a prop and a barrel of water . . .

I have PLENTY of "test" props. Come and take your pick.

I appreciate the offer. I think I will test it a a ramp on the trailer.
Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:51 AM.


Site best viewed at 1280X1024
© FishingTN.com