FishingTN.com Tennessee's Fishing and Boating Community

FishingTN.com Tennessee's Fishing and Boating Community (http://www.fishingtn.com/index.php)

- Local Fishing (http://www.fishingtn.com/forumdisplay.php?f=4)

- - test prop OMC (http://www.fishingtn.com/showthread.php?t=13786)

Alan 54

03-24-2022 08:02 PM

test prop OMC

TK Walker if you need to drop this topic down to the lounge I won't feel bad.
I am in need of a test prop to run in a tank. I have a 1998 Evinrude 225 running a 14-1/2 x 24 Raker. Any info on what I need or how to find out will be so helpful. Thanks

tkwalker

03-24-2022 08:40 PM

Wow

Alan, I only have test wheels for early vintage OMC's up to 35 HP... Sorry.

Alan 54

03-24-2022 09:05 PM

Quote:

Originally Posted by tkwalker (Post 88822)

Alan, I only have test wheels for early vintage OMC's up to 35 HP... Sorry.

I have been reading a lot online. I might be looking for a unicorn. I have only seen one for sale and it was gone. I'm not sure they even made one for a 1998 225hp.
My motor has been bogging down after it warms up. Last year I took a chance and had the power pack replaced. It ran good in cooler weather but when I was out last time it was mid 70's. It started cutting out again. I was wanting to run the motor to get it hot and test the circuits again. Thus the need for a test wheel. I would take it to a dealer but I don't want to miss the bite again this year. I missed it last year too. The repair side of the dealers are 4 to 6 weeks out. Thanks, Alan

tnduxcaller

03-25-2022 07:44 AM

You might go to the Prop Shop in Englewood. It is on the main drag on the right heading toward Dupont City. I would call them. They used to be really good with props. Good luck.

SalmonDaze

03-25-2022 10:13 AM

Quote:

Originally Posted by tnduxcaller (Post 88824)

You might go to the Prop Shop in Englewood. It is on the main drag on the right heading toward Dupont City. I would call them. They used to be really good with props. Good luck.

I don't know this shop, but I strongly agree with the direction of the proposed solution. There's nothing "magic" about year, make, model of an outboard and its prop.

A good prop shop will allow you to test multiple props before deciding on which one to purchase. The variable geometry, along with the hydro-dynamic properties of the boat (weight, centerline depth, etc) affect performance parameters.

A simple change of moving the outboard up a hole, or down a hole in its position on the transom ALONE can make a world of difference in how the boat/motor perform.

Good Luck!!! It can be a challenge.

notorious

03-25-2022 11:01 AM

Quote:

Originally Posted by tnduxcaller (Post 88824)

You might go to the Prop Shop in Englewood. It is on the main drag on the right heading toward Dupont City. I would call them. They used to be really good with props. Good luck.

I have used the Prop Shop as my primary source ever time I needed a prop. I can't recall the owners name, however he is magician when it comes to rebuilding props and giving advice.

tkwalker

03-25-2022 03:02 PM

FYI Test Wheels (PROPS)

A test wheel is a prop that lets you rev your motor under load without propelling the boat. Trying different props is not what Alan is asking for. Test wheels are simple to use on smaller motors that can be put in a barrel, In Alan's case he can back the trailer to the edge of the water on the ramp .. TK:eek:

Alan 54

03-25-2022 09:49 PM

Quote:

Originally Posted by tkwalker (Post 88827)

Thanks for saving me TK!!

SalmonDaze

03-26-2022 08:47 AM

1 Attachment(s)

I was wondering about the need for a prop and a barrel of water . . .

I have PLENTY of "test" props. Come and take your pick. :D ;)

https://www.frenchmarine.com/images/...propBefore.jpg

Alan 54

03-27-2022 09:19 AM

Quote:

Originally Posted by SalmonDaze (Post 88829)

I was wondering about the need for a prop and a barrel of water . . .

I have PLENTY of "test" props. Come and take your pick. :D ;)

https://www.frenchmarine.com/images/...propBefore.jpg

I appreciate the offer. I think I will test it a a ramp on the trailer.

All times are GMT -5. The time now is 01:15 PM.