Good news on my boat motor

[Texas_Rig]

In case you missed it in another thread. I was fishing Center Hill last week and noticed a small loss of power. I was having a little trouble planing out and lost a couple mph in speed. I got off plane and just idled around the rest of the day out of precaution until I could have a better look. I got home and did a compression check and had 118-120 psi in 5 cylinders and 100 psi in one. I took it to the mechanic fearing the worst. I got a call yesterday and my mechanic told me that I have a blown head gasket and that there is no damage to the cylinder at all. He also said that I have a broken exhaust something another. Basically the tube that the lower unit slides up in is broken. He said that tube has a big part in tuning my motor. He hasn't tore down the block yet but thinks I'm gonna get away with just replacing the head gasket and exhaust something another. I told him to go ahead and send the injectors off to be cleaned and whatever else they can do to them and replace any that appear to need it.

This is the best news I've had in a long time. If I wasn't sending the injectors off then it wouldn't hardly cost anything to fix my issues. I told him to go ahead and just remove the pump that electronically mixes the oil to. I'll just do it myself from now on. That thing failing is always in the back of my mind. I've also cut it pretty close a couple times by forgetting to add oil and almost running out. Problem solved.

[SalmonDaze]

How old is that engine?

[notorious]

PM sent...

[Schleprock]

Originally Posted by Texas_Rig

In case you missed it in another thread. I was fishing Center Hill last week and noticed a small loss of power. I was having a little trouble planing out and lost a couple mph in speed. I got off plane and just idled around the rest of the day out of precaution until I could have a better look. I got home and did a compression check and had 118-120 psi in 5 cylinders and 100 psi in one. I took it to the mechanic fearing the worst. I got a call yesterday and my mechanic told me that I have a blown head gasket and that there is no damage to the cylinder at all. He also said that I have a broken exhaust something another. Basically the tube that the lower unit slides up in is broken. He said that tube has a big part in tuning my motor. He hasn't tore down the block yet but thinks I'm gonna get away with just replacing the head gasket and exhaust something another. I told him to go ahead and send the injectors off to be cleaned and whatever else they can do to them and replace any that appear to need it.

This is the best news I've had in a long time. If I wasn't sending the injectors off then it wouldn't hardly cost anything to fix my issues. I told him to go ahead and just remove the pump that electronically mixes the oil to. I'll just do it myself from now on. That thing failing is always in the back of my mind. I've also cut it pretty close a couple times by forgetting to add oil and almost running out. Problem solved.

Good deal

[Texas_Rig]

Originally Posted by SalmonDaze

How old is that engine?

1996 mercury 175 efi

[Texas_Rig]

Originally Posted by notorious

PM sent...

I didn't get any messages

[Texas_Rig]

I talked to my boat mechanic again yesterday. He told me that he inspected every cylinder and they all look great. He put new gaskets on and all cylinders were within 2lbs of each other with a compression check. He's just waiting for the injectors to come back and put everything back together. It looks like I got lucky this time. I think by not continuing to run my motor saved me a lot of money. I know my boat and while it was hardly noticeable, I knew I was down just a very small amount of power. Had I been by myself that day and not had 2 livewells full of water, I don't think I would have noticed any difference. Without the added weight of my 300lb best friend and all the extra water weight I'm sure my boat would have planed out just like it always has and I wouldn't have known any better.

[Flatline]

Good to hear..

[barryburk]

Who and where is your boat mechanic? I need one but don’t know any. Thanks

[Texas_Rig]

I picked my boat up Thursday. It runs better than it did before I had a problem.

[Texas_Rig]

Originally Posted by barryburk

Who and where is your boat mechanic? I need one but don’t know any. Thanks

I use 101 Marine in Scottsville KY. The owners name is Joel and he is very good at rebuilding motors. He doesn't take on a whole lot of customers unless it's motor mechanical related. He doesn't even do service calls anymore unless he built the motor. He mainly buys crate motors and builds them or buys boats with blown up motors and rebuilds them. He will stand by his work.