FishingTN.com Tennessee's Fishing and Boating Community

Go Back   FishingTN.com Tennessee's Fishing and Boating Community > Fishing Discussion > Local Fishing
Register FAQ Members List Calendar Mark Forums Read
Google
 


Reply
 
Thread Tools
  #1  
Old 06-19-2014, 12:40 PM
CreekWalker's Avatar
CreekWalker CreekWalker is offline
Member
 
Join Date: Feb 2012
Posts: 162
Default Cumberland River gauge - Nashville

Has anyone ever tracked how long it takes for flow from Old Hickory Dam to reach, say, Old Hickory Blvd, the mouth of the Stones, Lock 2, Mill Creek, etc.?

I'm curious as well about flow from 0-1 generator and 1-2 generators.

Surely when you're as far as downtown the effect will have blended quite a bit to be not so dramatic.

Also, the USGS gauge in Nashville has consistently been showing a couple hours a day reading a negative flow. The remainder of the readings look to mimic what the TVA says about the dam's observed data but can anyone elaborate?
Reply With Quote
  #2  
Old 06-19-2014, 01:03 PM
Travis C. Travis C. is offline
Senior Member
 
Join Date: Aug 2007
Location: Sevierville, TN
Posts: 4,655
Default

Center Hill on one generator moves about 3 miles per hour. Not sure if the same holds true for OH.

Are you checking this site as well or just the USGS site?

http://rivergages.mvr.usace.army.mil...new/layout.cfm

Second thought, it would be really hard to figure the water speed exactly due to all the creeks feeding and how hard Cheatham is pulling. The only way for sure to know water speed (current wise) is to have Dave "fishfindergeneral" with you and him bring his fish hawk trolling system.

Last edited by Travis C.; 06-19-2014 at 01:24 PM.
Reply With Quote
  #3  
Old 06-19-2014, 01:37 PM
blink's Avatar
blink blink is offline
Senior Member
 
Join Date: Oct 2012
Location: Inglewood, Nashville, TN
Age: 45
Posts: 424
Default

I use the NOAA site. They have 5 gauges between OHD and Downtown. You can see on them how little effect the current generation at the dam has on the water level downtown. Each green dot on the map is a gauge if you click it a graph comes up.

http://water.weather.gov/ahps/region.php?state=tn
Reply With Quote
  #4  
Old 06-19-2014, 09:36 PM
Cornbread Cornbread is offline
Member
 
Join Date: Nov 2007
Location: Mt Juliet
Posts: 156
Default

Thought a lot on that. 1.8 -2.2 mph is the most accurate by trial and error.faster on the caney. Slower on the cumb. It really slows down from Rome to hunters point.There are so many variables.
Reply With Quote
  #5  
Old 06-20-2014, 10:15 AM
CreekWalker's Avatar
CreekWalker CreekWalker is offline
Member
 
Join Date: Feb 2012
Posts: 162
Default

Thanks guys! Yeah, I have Caney about down to a science. It's much more volatile! I have no electronics but according to the gauge readings there the water from Happy to Betty's is about 7 mph but yes Travis over any long stretch it averages at or just under 3 mph.

I'm finding the fish on the Cumberland to be programmed. The closer to Old Hickory the more the new water seems to help. I can always catch a few little spotted bass downtown but don't like fishing without current/relying on my trolling motor.

I'm trying to find that sweet spot - but - it's fishing!! Last summer I crushed the smallmouth everywhere from the mouth of the stones down to about Opryland but that stretch has absolutely sucked for me so far this year!! I've done better with a few small fish by the dam and a few small fish downtown. I can't figure it out!!
Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:48 PM.


Site best viewed at 1280X1024
© FishingTN.com