Walmart Fishing Department

[aero320]

Originally Posted by todrut

I heard also about trolling for walleye on the cumberland river below cordell hull dam. Can anyone tell me about how to do this?

Same setup as for crappie.

[Transplanted Sportsman]

Originally Posted by aero320

Found Bandit 300s at Walmart in Manchester on the way to the lake. $5.56 each.

that is good to know they have them there (which is close to me!), I do run to or trough Manchester often which is better than run to bass pro, thanks for the info!!

[todrut]

sorry, don't know how to troll for crappie?? Could someone explain?

[jad2t]

Originally Posted by todrut

Reading this post I don't understand trolling for crappie? I am new to fishing but all I've heard is find trees, brush, ect. and fish those. How does trolling work?

Two kinds of trolling. One is a method for catching fish, the other involves getting people pissed off on the internet. I do both very often and find them both to be very fun!

Trolling for any species involves a slow speed either by trolling motor or padding for us kayakers and casing some sort of crankbait or maybe a curly tail grub way behind the boat and cruise around. When doing this via trolling motor or very slow speed with an outboard, you can sit back and eat, drink a beer, whatever you choose, and wait for the rod to bend. I do it sometimes in the yak but it's not as much fun to keep paddling. I'd rather drift and just keep casting a crankbait.

[todrut]

Thanks Jimmy, do you troll in middle of lakes, along banks? Where is best? I want to try trolling cumberland river, would you troll up river I'm guessing? During generation periods or no generation? Thanks!

[jad2t]

Trolling is most effective if you have a depthfinder so you know what you're doing. If you're trolling a 6ft diving crankbait in 25 feet of water you very well could be wasting your time. So whether its the middle of the lake or close to shore, you need to have a lure that dives to the appropriate depth either depending on how deep the water is or how deep the fish are that you're chasing.

I've never trolled in a fast moving river in my kayak, only in other's boats and their outboards running us at a slow speed. I would never put my kayak in the Cumberland River unless the flow was very slow coming out of OHD. Most times the flow is way too fast for me to want to attempt that.

[txnative]

Originally Posted by todrut

sorry, don't know how to troll for crappie?? Could someone explain?

This time of year, crappie will be suspended in open water. A quick-start approach is to go to the areas you caught crappie in the spring and cruise slowly in the deeper water nearby. Watch your depthfinder's screen closely. Crappie tend to school vertically. If you see a relatively elongated cloud of fish that look like a column, that's probably a school of crappie. Take note of the depth you found them to be suspended. All you have to do is run your cranks at or near to that depth. You may have to fine-tune your approach, but this is a good starting point. Cranks in the 1.5-2 inch size work well and feel free to experiment with colors. Troll fast enough to cause the cranks to wobble. A good eyeball test is to cast and retrieve a crankbait and watch your rodtip. When you troll, adjust your speed so that the rodtip moves/vibrates at the same speed as when you are casting/retrieving. I like fast-action rods when I'm trolling since the stiffness ensures a better hook-up, but a slower action may be better in a motor-powered boat.


Chris

[todrut]

Thanks Chris, didn't know about crappie being out in the open. I'm going to use this info and give it a try. I have not learned to use and understand my depth/fish finder.

Jimmy, I appreciate the info also and will be trying it in the next few days depending on weather. I'm close to Carthage so I'll be below Cordell Hull

Thank you both!!!

[Travis C.]

Cranks catch a lot of crappie but don't overlook trolling soft plastics. I'll troll Wee-R's when covering water along channel edges or cover that can hold crappie. If I am fishing an area where I know for a fact crappie are there then I will troll Crappie Magnets in various colors a little slower than the crankbaits. That method catches me a lot of fish in the summertime.

[todrut]

Travis, when trolling trout magnets what size head do you use? Any other weight? What depth are you trolling? Thanks for the info...

[Travis C.]

Originally Posted by todrut

Travis, when trolling trout magnets what size head do you use? Any other weight? What depth are you trolling? Thanks for the info...

No other weight. I tie the jig head on with a loop knot to aid in movement. On the jig size, I'll start rod on each size (one 1/4, one 1/8) then which ever side starts getting will change so that both are same weight/same color.

[todrut]

Great, thank again...

[Travis C.]

Also, when I pull CM's it is on trolling motor set to 1 with intermittent pauses. Doing that lets the magnet fall horizontal like it's designed and triggers bites too.

Look up "Strolling for Crappie."