FishingTN.com Tennessee's Fishing and Boating Community

Go Back   FishingTN.com Tennessee's Fishing and Boating Community > Mid South Outboards > Tech Tips
Register FAQ Members List Calendar
Google
 


Reply
 
Thread Tools
  #1  
Old 05-27-2018, 02:11 PM
FishAddict FishAddict is offline
Member
 
Join Date: Jan 2016
Location: Hendersonville
Posts: 179
Default Bendix Gear Hanging in Flywheel

This is the second time this has happened, locked up at the launch. The Bendix hangs/locks up in the Flywheel. Is this caused by a bad Bexdix gear? It has boogered up a couple of teeth on the flywheel. I got it freed up once I got home and seems to be OK now. Thanks for advice on this.
Reply With Quote
  #2  
Old 05-27-2018, 09:13 PM
tkwalker's Avatar
tkwalker tkwalker is offline
Owner and Administrator
 
Join Date: Apr 2005
Location: Lebanon, Tennessee
Posts: 2,925
Smile Okay..... <'TK><

Quote:
Originally Posted by FishAddict View Post
This is the second time this has happened, locked up at the launch. The Bendix hangs/locks up in the Flywheel. Is this caused by a bad Bexdix gear? It has boogered up a couple of teeth on the flywheel. I got it freed up once I got home and seems to be OK now. Thanks for advice on this.
This is how the starter system work ...When you turn the key the starter solenoid applies power to the starter motor. When it spins it sends the Bendix Gear up and engages the flywheel. As soon as the Motor starts the starter motor stops and the Bendix gear falls down out of the way of the flywheel. It sounds like the Bendix is not getting engaged completely.

One of three items is your problem... The cheapest items is the solenoid, (and Bendix) The sol. could be failing and interrupts the power to the starter motor from running... or it could be the starter itself. The Bendix could be worn and not traveling properly .. (short explanation)

Intermittent problem are hard to trouble shoot and nail down. Start eliminating components one at a time since the problem is intermittent. <'TK><

Last edited by tkwalker; 05-28-2018 at 10:30 AM.
Reply With Quote
  #3  
Old 05-28-2018, 12:22 PM
FishAddict FishAddict is offline
Member
 
Join Date: Jan 2016
Location: Hendersonville
Posts: 179
Default

When this happens the gears are stuck and aren't lined up/not meshed which makes me think the gear is bad. Seems like the Bendix gear is beveled so it moves the wheel slightly to align the gears....Sound correct? Thanks
Reply With Quote
  #4  
Old 05-28-2018, 09:03 PM
tkwalker's Avatar
tkwalker tkwalker is offline
Owner and Administrator
 
Join Date: Apr 2005
Location: Lebanon, Tennessee
Posts: 2,925
Smile Okay .... <'TK><

Quote:
Originally Posted by FishAddict View Post
When this happens the gears are stuck and aren't lined up/not meshed which makes me think the gear is bad. Seems like the Bendix gear is beveled so it moves the wheel slightly to align the gears....Sound correct? Thanks
Now the gear may be bad ... By what caused it to go bad and chew itself up ... I still think the answer is in my previous post ... The Bendix gear has not either been completing it's full travel to engage ... Or it is not dropping out of the way and binding the flywheel ... <'TK>< Start with replacing the Bendix..


Last edited by tkwalker; 05-29-2018 at 04:01 PM.
Reply With Quote
  #5  
Old 05-29-2018, 03:58 PM
tkwalker's Avatar
tkwalker tkwalker is offline
Owner and Administrator
 
Join Date: Apr 2005
Location: Lebanon, Tennessee
Posts: 2,925
Smile Re think .. <'TK><

FA, first off it is hard to troubleshoot anything over the phone or cyber space... I was thinking of your problem today and think I know your primary cause.

When the starter spins, it does it at a velocity that it actually spins the Bendix gear into the flywheel. When the starter starts going bad and they loose their punch this will retard the engagement into the the flywheel and not letting the the gear mesh correctly so the edge of the gear starts to be worn as well as the flywheel teeth. (And at times Hangs and will not fall)

Just go ahead and bite the bullet and purchase a new starter (they come with a new Bendix)... Replace with a ARCO starter, Made in Florida, not China.. If interested I may be able to save you a few $$ on it .... <'TK><
Reply With Quote
  #6  
Old 05-31-2018, 07:56 PM
FishAddict FishAddict is offline
Member
 
Join Date: Jan 2016
Location: Hendersonville
Posts: 179
Default

Sounds like good advice, Thanks TK.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:34 PM.


Site best viewed at 1280X1024
© FishingTN.com