View Single Post
  #38  
Old 01-21-2019, 12:05 AM
tkwalker's Avatar
tkwalker tkwalker is offline
Owner and Administrator
 
Join Date: Apr 2005
Location: Lebanon, Tennessee
Posts: 2,925
Smile Trim .... <'TK><

Quote:
Originally Posted by FishAddict View Post
I don't know how to adjust it, but surely you can. I'd call the folks at the service center that helped you out. They should know.
The sending unit to the gauge is located on the trim unit ..Usually on the pivot but depending on the motor, model and year it could be elsewhere on the trim ...

But it is easy to check on the trailer .. tuck your motor all the way down if the gauge shows max down great, then raise your motor up (NOTE: trim only not Tilt On some the tilt and trim travel is different ) if you have that option, some of the newer smaller t/t with one cylinder won't) Basically you can get a ball park indication if the gauge is following the sending unit.
<'TK>< PS... When the prop blows out I would say your gauge will indicate 75% plus UP.. Also watch your tach.

Last edited by tkwalker; 01-21-2019 at 12:09 AM.
Reply With Quote