[tkwalker]

Originally Posted by nomad60

In the attached pic, is this the bracket you guys are talking about? I'll have to go to a store and look at them but it looks like that bracket would mount on the trailer right above the lights, at a 90 degree angle, parallel to the ground...but the transom saver comes in at about a 45 degree angle so I'm having a hard time picturing how the bracket and rod would mate up correctly to give good support.

Nomade ...The receiver that mounts to the trailer is made with the end of it at a 45 deg. angle ... It does not stub out straight (@ 90 deg.) Unless they have changed them but I don't think so ...

But on the bolt on model receiver in your pic , how it works is that the support Bar saddles in between the receiver with a hitch pin that goes through it letting it swivel to any position (angle) <'TK><