Crappie Boat
 

Been thinking about selling my boat. It is set-up for pulling jigs/cranks and pushing.

1996 Alumacraft Lunker V16 LTD 50th anniversary model (16.75 ft and only 560 lbs).
25 hp Honda tiller with a newish 4-blade prop (better control when trolling). Also have tiny-tach installed. Solo runs around 28-29 mph and trolls around 1.7 mph. 3-blade ran about 33 mph and trolled 1.5 mph. Rated for up to 45 hp tiller.
55 lb, Minnekota Edge foot control bow mount
Lowrance x75 and an Eagle (not sure if it works)
Sits in a garage on Hustler trailer with radial tires
Bimini top mounted to tracks (about 3 ft long) so top can be slid towards the bow or stern
Spyderlok 4-pole holder on the bow. I use it for pushing, but it can also be used for spider-rigging
6 rod holders along gunnels, 2 roberts and 4 rod tender brand. They all adjust up/down and swivel 360 degrees.

I will try and find some better pics, but here is what I could find quickly:
https://scontent-b-lga.xx.fbcdn.net/...ed&oe=54F2CF4D

https://fbcdn-sphotos-c-a.akamaihd.n...6532fbd832842b

https://scontent-a-lga.xx.fbcdn.net/...a8&oe=54EB1DE5

asking $4500, I am near Chattanooga

Craigslist:
http://chattanooga.craigslist.org/boa/4806006453.html

Nice looking boat. Oughta sell quick....even in the winter.