FishingTN.com Tennessee's Fishing and Boating Community

FishingTN.com Tennessee's Fishing and Boating Community (http://www.fishingtn.com/index.php)
-   Tech Tips (http://www.fishingtn.com/forumdisplay.php?f=19)
-   -   Electronics wiring? (http://www.fishingtn.com/showthread.php?t=11828)

Itgotaway 01-26-2017 12:00 AM

Electronics wiring?
 
Anyone know of someone that does a good job wiring and installs on the side? If not as a side job then what local shop can do things right without overcharging? Need to get a NMEA hooked up correctly through an accessory switch and would like to get master power switches put on my batteries.

Thanks
Jason

ALANRAYG2 01-26-2017 11:43 PM

Quote:

Originally Posted by Itgotaway (Post 76745)
Anyone know of someone that does a good job wiring and installs on the side? If not as a side job then what local shop can do things right without overcharging? Need to get a NMEA hooked up correctly through an accessory switch and would like to get master power switches put on my batteries.

Thanks
Jason

I just finished my boat. I installed a Lowrance hds 7 gen2 touch on the bow and hds 9 gen2 touch on the console and a point 1 antenna on the transom. I put a 12 volt outlet under the console in case I needed to charge my phone. I had to add a new 6 circuit fuse panel and a master switch. I installed an ethernet cable and nmea 2000 system. It took me a while but I went slow and deliberate. If you live around Columbia I would be willing to give you a hand. If you decide to do this yourself I would give you all the information that I have and the places I ordered the parts.


All times are GMT -5. The time now is 08:51 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.