FishingTN.com Tennessee's Fishing and Boating Community

Page 2 of 2

Show 30 post(s) from this thread on one page

FishingTN.com Tennessee's Fishing and Boating Community (http://www.fishingtn.com/index.php)

- Fishing Gear (http://www.fishingtn.com/forumdisplay.php?f=7)

- - Weird Motor Noise At High Rpm? (http://www.fishingtn.com/showthread.php?t=11547)

TnCreekMaster

08-17-2016 11:56 AM

Quote:

Originally Posted by Buccaneer (Post 74524)

Do you mean the thrust washer behind the prop (lower unit side) or the washer behind the nut? Most certainly in either case your prop would be floating on the prop shaft. If the thrust washer was missing the barrel of the prop could have been rubbing the lower unit case, not a good scenario.

Luckily it is just the nut spacer ordered a couple of them and some new cotter pins, going to drain and inspect the lower unit oil this weekend keeping fingers crossed it's not milky or no metal shavings.

Buccaneer

09-02-2016 04:43 PM

So what's the verdict on this situation TNCreekMaster? Are you back in the water?

TnCreekMaster

09-05-2016 11:59 AM

Quote:

Originally Posted by Buccaneer (Post 74784)

So what's the verdict on this situation TNCreekMaster? Are you back in the water?

Not looking good I couldn't even get the lower drain plug out, it stripped even with using the biggest flat head I could find

Buccaneer

09-05-2016 04:20 PM

Sorry to hear that. If this is an Evinrude/Johnson/OMC-BRP engine the world's greatest lower unit guy lives in Charleston, TN. Eddie Pope. Sign on the BassBoatCentral.com forum and look up "Gearcaseman". Carry it down there and get it fixed right.

TnCreekMaster

09-05-2016 05:45 PM

Quote:

Originally Posted by Buccaneer (Post 74813)

Thanks for the info I'll look him up

Tyler

All times are GMT -5. The time now is 07:41 AM.

Page 2 of 2

Show 30 post(s) from this thread on one page