Latest Rod.

[Alphahawk]

The TICT "Ice Cube Rockin' Drift" is here! Bottom section of 2 piece rod is a Toray 50 ton blank. The top section of the rod is all solid SP-Carbon. The guide frames are titanium with Torzite ceramic inserts. Rated for .8 - 3 pound mono. Lure rating is 1/275 - 3/16. If a fish sniffs my lure he is mine....LOL. As soon as I can get on the water giving this rod a workout. It is a 6'9" that weighs 2.4 ounces. It is not whippy as we have come to know UL rods we have here...it is a fast action. The tip is only .7 mm diameter. I looked and looked to find a rod from Japan that would compare to the Phenix Iron Feather....and this is it. While I won't try it I have seen videos where the tip is pulled down to the same level as the butt..or maybe even lower. Yet it has plenty of backbone for bigger trout and Smallies. It is 99 percent graphite with only one percent resin. How they do it over there I don't know but they sure put out some good stuff.


Regards

[metaniumxg]

The TICT "Ice Cube Rockin' Drift" is here! Bottom section of 2 piece rod is a Toray 50 ton blank. The top section of the rod is all solid SP-Carbon. The guide frames are titanium with Torzite ceramic inserts. Rated for .8 - 3 pound mono. Lure rating is 1/275 - 3/16. If a fish sniffs my lure he is mine....LOL. As soon as I can get on the water giving this rod a workout. It is a 6'9" that weighs 2.4 ounces. It is not whippy as we have come to know UL rods we have here...it is a fast action. The tip is only .7 mm diameter. I looked and looked to find a rod from Japan that would compare to the Phenix Iron Feather....and this is it. While I won't try it I have seen videos where the tip is pulled down to the same level as the butt..or maybe even lower. Yet it has plenty of backbone for bigger trout and Smallies. It is 99 percent graphite with only one percent resin. How they do it over there I don't know but they sure put out some good stuff.


Regards
Nice rod, high end components.. is it JDM?

[Alphahawk]

Nice rod, high end components.. is it JDM?

Thanks....yeah it is JDM. Fuji titanium frames and the new Torzite inserts are Fuji also. Fuji grip with Fuji carbon fiber lock nut. A 50 ton Toray blank is pretty high end. Here is link to a video that helped me make up my mind to get this rod. The rod I purchased starts at 8:29 but the first 10 minutes of the video shows some impressive stuff on their other rods. This thing screams "made for Trout Magnet" all over it.


Regards

http://www.fishing-v.jp/movie/?mv=sgea_1405_8510320_04

[XxthejuicexX]

That is a sweet rod. I tried to look into a price for them but everything I found online was in a language and currency I did not know how to read :)

[Alphahawk]

That is a sweet rod. I tried to look into a price for them but everything I found online was in a language and currency I did not know how to read :)

Thanks juice. It is a hard road to navigate when you start out. I am a member over at TackleTour but most of those guys....even though they are nice and will help you as they can....are bass guys. They have a lot of info on buying a JDM bass rod but not many purchase 400 dollar UL rods.


Regards

[agelesssone]

Thanks juice. It is a hard road to navigate when you start out. I am a member over at TackleTour but most of those guys....even though they are nice and will help you as they can....are bass guys. They have a lot of info on buying a JDM bass rod but not many purchase 400 dollar UL rods.


Regards

Can I borrow that rod?

I'm going to GSP striper fishing and I want to give it a good testing!

[XxthejuicexX]

Can I borrow that rod?

I'm going to GSP striper fishing and I want to give it a good testing!

Are you going to be that guy that lets his fish run all over the place because he is using to light of line..... 2lb, really merv? I found out last time that if the striper wants to go it's going to go, you are not in control.

[XxthejuicexX]

Thanks juice. It is a hard road to navigate when you start out. I am a member over at TackleTour but most of those guys....even though they are nice and will help you as they can....are bass guys. They have a lot of info on buying a JDM bass rod but not many purchase 400 dollar UL rods.


Regards

BTW, I think a really high quality rod would come more in hand with super light line.

[Alphahawk]

Can I borrow that rod?

I'm going to GSP striper fishing and I want to give it a good testing!

Such a wonderful friend you are Merv....LOL. I will pass on that offer though....LOL. I just looked and they dropped the flow at Normandy to 100 CFS. It will be cold tomorrow but will try to get some of those stocker trout to see how sensitive it really is.


Regards

[tcintn]

Such a wonderful friend you are Merv....LOL. I will pass on that offer though....LOL. I just looked and they dropped the flow at Normandy to 100 CFS. It will be cold tomorrow but will try to get some of those stocker trout to see how sensitive it really is.


Regards

I think I will wait for your report on the how the trout are hitting.
That is one awesome looking rod.
Stay safe going to the Duck.

[Alphahawk]

I think I will wait for your report on the how the trout are hitting.

That is one awesome looking rod.

Stay safe going to the Duck.


Just occurred to me Ed that road to the dam off the highway will be impassable. So much for that plan.

Regards


Sent from my iPhone using Tapatalk

[Travis C.]

Sweet looking JDM rod Alpha. Cant wait to hear the results.

[metaniumxg]

Have you ever through of "Bait Finessing" Alphahawk? I have a couple of BFS setups and another coming from Japan.

[Alphahawk]

Have you ever through of "Bait Finessing" Alphahawk? I have a couple of BFS setups and another coming from Japan.

I have...and that is where these Ajing rods I have purchased got their start from. I have a VOLKEY Super Finess Solid Tip VKS-S682L/SFS. It is rated for 1/64 through 1/4. While it is not the most expensive rod I have gotten out of Japan it is really a great rod. MidTNKayakAngler just got two Volkey BFS rods himself from Japan.


Regards

[Alphahawk]

Sweet looking JDM rod Alpha. Cant wait to hear the results.

Thanks Travis...was going to try it at Normandy tomorrow but don't think the road is passable.


Regards

[metaniumxg]

I have...and that is where these Ajing rods I have purchased got their start from. I have a VOLKEY Super Finess Solid Tip VKS-S682L/SFS. It is rated for 1/64 through 1/4. While it is not the most expensive rod I have gotten out of Japan it is really a great rod. MidTNKayakAngler just got two Volkey BFS rods himself from Japan.


Regards

I have a Volkey as well lol, and an MS-X on the way.

[Alphahawk]

I have a Volkey as well lol, and an MS-X on the way.


I have 3 rods from Major Craft. Best bang for the buck IMHO.

Regards


Sent from my iPhone using Tapatalk

[Travis C.]

Thanks Travis...was going to try it at Normandy tomorrow but don't think the road is passable.


Regards

Better safe than sorry. There are a few places i fish it may take a day or two to stumble on another person if i had trouble.

[Reel Tune]

Very nice rods Alpha. Have you ever thought of trying an ultra lite bait casting finesse outfit?

[Alphahawk]

Very nice rods Alpha. Have you ever thought of trying an ultra lite bait casting finesse outfit?

I have. Up until 2004 I owned a ton of bait casting reels. But I would have no clue as to what to look for in the reel department to throw a 1/32 ounce bait. Have you done it and if so what pound test line have you used and what kind of distance did you achieve. Also I would think backlash would be a big issue....but I'm sure bait casters have changed a ton in the past 11 years. I do know I have seen blogs...all in Japanese of course....where they had bait casters mounted on light trout rods.


Regards

[Reel Tune]

I haven't done it. The Pixy and Volkey rod Sarah just got will be for smallmouth and using 5# test and baits 1/4oz down to 1/32 oz, but will probably not go that low. The Aldebaran and Volkey will be spooled with 4lb test and I'll be throwing much lighter stuff like hopefully Trout Magnets, and Trout Slayers. With BFS you'll usually go shallower spools for less start up effort, lighter line, and special bearings. We'll see how it all comes together in May hopefully.